Proxim wireless ORiNOCO AP-4000MR-LR Przewodnik Instalacji Pobierz pdf (Strona 9)

Step 1: Choose a Location

To make optimal use of the unit, you must nd a suitable location for the

hardware. The range of the radio unit largely depends upon the position of the

antenna. Proxim recommends you do a site survey, observing the following

requirements, before mounting the hardware.

The location must allow easy disconnection of power to the radio if ▪

necessary.

Air must be able to ow freely around the hardware. ▪

The radio unit must be kept away from vibration and excessive heat. ▪

The installation must conform to local regulations at all times. ▪

The unit is designed to directly mount to a pole or wall. Using the supplied

brackets and hardware, you can mount them to a 1.25 inch to 3-inch pole

(outside diameter). Longer bolts (not supplied) are required for mounting the

units to a larger diameter pole. Using just one of the mounting brackets, you

can mount it to a wall or other at surface.

Caution!

Proxim recommends the use of a lightning arrestor at the building

ingress point. You can purchase the Proxim Lightning Protector;

see the documentation that comes with the Lightning Protector for

more information and installation instructions.

Step 2: Unpack the Shipping Box

Unpack the unit and accessories from the shipping box.1.

Note the Ethernet and MAC addresses of the unit, as well as the serial 2.

number. The addresses may be used when conguring the unit. The serial

number is required to obtain support from Proxim. Keep this information in

a safe place.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 31 32

Brak uwag

Proxim wireless ORiNOCO AP-4000MR-LR Przewodnik Instalacji Strona 9