Proxim wireless ORiNOCO AP-4000MR-LR Przewodnik Instalacji Pobierz pdf (Strona 3)

INTRODUCTION

The AP-4000MR-LR and AP-4900MR-LR are ruggedized tri-mode APs optimized

for outdoor deployments. They are equipped with the following embedded

radios:

AP-4000MR-LR: ▪ One embedded 5.8 GHz (802.11a) radio and one

embedded 2.4 GHz (802.11b/g) radio, enabling simultaneous support

of 802.11a, 802.11b, and 802.11g clients. The unit also supports Mesh

operation on either the 2.4 or 5.8 GHz band.

AP-4900MR-LR: ▪ One embedded 4.9 GHz radio and one embedded

2.4 GHz (802.11b/g) radio, enabling simultaneous support of 4.9 GHz,

802.11b, and 802.11g clients. The 4.9 GHz radio is for use in the licensed

4.9 GHz Public Safety band; only users with licenses to operate in this band

should access it. The unit also supports Mesh operation on either the 2.4 or

4.9 GHz band.

There are two versions of the AP-4000MR-LR/4900MR-LR hardware. Differences

between hardware versions are highlighted in this manual as necessary. See

Figure 1 through Figure 4. The Identifying Your Hardware Variant section of this

guide will help you determine which variant you have.

The APs can operate either using PoE with the combination DC power supply/

injector provided or directly from a 100 - 240 VAC power source (AC cable

ordered separately).

The units feature internal lightning and surge protection on the AC and DC

power ports, the Ethernet port, and on both antenna ports. External antenna

lightning protection is not needed.

Each unit is equipped with:

Power/Ethernet port: ▪ used for Ethernet connection and Power over

Ethernet (PoE) using the supplied power injector.

Serial connection: ▪ used for entering commands in the Command Line

Interface (CLI). FC versions of the product are not equipped with a serial

connection.

LED indicator(s): ▪ dual LEDs used to indicate the power and operational

states of the unit. FC versions of the product are equipped with a single

power LED on the back of the unit in the cooling n area.

AC power input: ▪ enables direct power from external AC power source.

External antenna connectors (two): ▪ one for 2.4 GHz operation, the

other for either 5.8 GHz or 4.9 GHz operation, depending on your product

model.

Grounding screws (two) ▪

1 2 3 4 5 6 7 8 ... 31 32

Brak uwag

Proxim wireless ORiNOCO AP-4000MR-LR Przewodnik Instalacji Strona 3